EDMO Equipment
6 Olney Court, Southport
QLD Australia. 4215

PH: 61 + 7 55912400
FAX: 61 + 7 55912210

Email: sales@edmo.com.au
Website: http://www.edmo.com.a

 

 

 

The Australian and New Zealand Standard (AS/NZ2693) advises, "do not get under a load supported by a jack. Use a suitable stand." EDMO stands provide assurance and extra safety when using jacks.
 

Jacking Stands - comply with AS/NZ2538


EDMO JACKING STANDS were developed to comply with the Australian Standard for jacking vehicles (AS/NZ2693) which prohibits a person from getting under a vehicle supported only by a jack. The standard says "do not get under a load supported by a jack. Use a suitable stand."

The EDMO Stands are adjustable for height and that adjustment is carried out hydraulically, eliminating the risk associated with the generally available adjustable stands which require manual adjustment, often resulting in physical injury to the operator. EDMO have safety engineered into its Stands.

EDMO Stands are positioned under the vehicle using the detachable transporter which allows the operator to easily move stands and position them under vehicles without having to get under the vehicle. One transporter will be sufficient for several stands of compatible size.

EDMO Stands are designed to allow them to be used on most surfaces. When used on concrete workshop the load is taken by 3 pads under the Stand. This eliminates rocking. On softer surfaces, eg in the feild, the load is taken over the entire base, thus providing a sure footing for all applications.

Stands currently available are the 20, 50, 100 and 150 Tonne Capacity Models and range in standard height from 620mm to 1550mm.

Stands are frequently manufactured to special heights required by EDMO customers.

EDMO JACK STAND TECHNICAL INFORMATION

 
*** EDMO JS2 image ***
EDMO JS2
CAPACITY: 25,000 Kgs
CLOSED HEIGHT WITH CAP DOLLIE: 625mm
ADJUSTMENT INCREMENTS: 28mm
RAISED HEIGHT WITH CAP DOLLIE: 1000mm
EXTENSION DOLLIE SUPPLIED WITH UNIT: 400mm
TRANSPORTER MODEL .: JST2

EDMO JS5
CAPACITY: 50,000 Kgs
CLOSED HEIGHT WITH CAP DOLLIE: 625mm
ADJUSTMENT INCREMENTS: 37.5mm
RAISED HEIGHT WITH CAP DOLLIE: 985mm
EXTENSION DOLLIE (optional) : 400mm
TRANSPORTER MODEL . JST5/10

EDMO JS10
CAPACITY: 100,000 Kgs
CLOSED HEIGHT WITH CAP DOLLIE: 840mm
ADJUSTMENT INCREMENTS: 51mm
RAISED HEIGHT WITH CAP DOLLIE: 1350mm
EXTENSION DOLLIE (optional) : 400mm
TRANSPORTER MODEL : JST5/10


EDMO JS15
CAPACITY: 150,000 Kgs
CLOSED HEIGHT WITH CAP DOLLIE: 1015mm
ADJUSTMENT INCREMENTS: 51mm
RAISED HEIGHT WITH CAP DOLLIE: 1626mm
EXTENSION DOLLIE (optional): 450mm
TRANSPORTER MODEL : JST15



EDMO JS20
CAPACITY: 200,000 Kgs
CLOSED HEIGHT WITH CAP DOLLIE: 1000mm
RAISED HEIGHT WITH CAP DOLLIE: 1550mm
Maximum Operating Height with standard base: 2000mm
EST Weight: 400kgs each
Supplied with Concave Cap Dollie Only


RIGID STANDS

EDMO manufacture to order non-adjustable Stands, as well as the adjustable Stands.

These are designed and manufactured to any specification.


EDMO STAND CARRIER

The EDMO Stand Carrier is for those awkward situations where it is difficult or impossible to use a standard EDMO Stand Transporter.

To comply with the Australian Standard the EDMO Stand Carrier must be used in conjunction with the EDMO Lift'n'Lock Jack. Once it is in place personnel can get under the load and position the EDMO Stand with the trolley. Once in position the EDMO Lift'n'Lock can be removed leaving the load supported by the stand. The trolley can then be removed.